How Much Does Concrete Cutting Cost in Vancouver, WA? (2026 Pricing Guide)
2026 Concrete Cutting Prices by Job Type
Concrete cutting in Vancouver, WA, typically costs between $1.50 and $35 per linear foot in 2026, depending on cut type, slab depth, and site conditions. This guide breaks down pricing by job type, explains what drives costs up or down in the Clark County area, and answers the most common questions contractors and property owners ask before calling a specialist.
Flat Sawing (Slab Sawing)
Flat sawing is the most common and affordable method. It handles horizontal cuts in floors, driveways, and slabs for utility trenches, expansion joints, and slab removal. A standard 4-inch slab runs roughly $1.50 to $3.50 per linear foot. Deeper cuts into thicker commercial slabs push that rate higher.
Core Drilling
Core drilling creates round holes for plumbing, electrical conduit, and HVAC penetrations and is priced per hole. A standard 3- to 4-inch diameter hole through a 6-inch slab typically runs $50 to $150. Larger-diameter holes, heavily reinforced concrete, or wall-mounted drilling raise that figure. Most contractors apply a minimum service charge of $150 to $500 to cover travel, setup, and teardown.
Wall Sawing
Wall sawing uses a track-mounted diamond-blade saw to make precise vertical or angled cuts for door openings, window cutouts, and HVAC penetrations. It is a premium service requiring specialized equipment and trained operators. Expect to pay $8 to $35 per linear foot depending on wall thickness and access conditions.
What Factors Affect Cutting Cost in Vancouver, WA?
List of services
-
Slab Depth and ReinforcementList Item 1
Cutting through reinforced or post-tensioned concrete requires more time and faster blade wear. Rebar removal adds $1 to $3 per square foot to demolition pricing.
-
Indoor AccessList Item 2
Interior jobs in tight spaces, such as Salmon Creek basement remodels or Hazel Dell tenant improvements, take longer to set up and may require slurry containment, adding $150 to $400 on medium-scale jobs.
-
Cut DepthList Item 3
Basement floor cuts for new plumbing at 8 to 18 inches deep can run $25 to $65 per linear foot, considerably more than a shallow slab cut.
-
MobilizationList Item 4
Most contractors charge a minimum call-out fee. On smaller projects in neighborhoods like Felida or Battle Ground, that fee can represent a significant share of the total bill.
Do You Need a Permit for Concrete Cutting in Clark County?
Many routine cutting jobs do not require a standalone permit. However, if your project involves structural modifications, new plumbing, electrical work, or a utility connection, Clark County's Community Development office or the City of Vancouver may require a building or alteration permit. Always confirm requirements before work begins starting without a permit can trigger double fees.
How Much Is a Minimum Service Charge?
Minimum charges in 2026 typically fall between $150 and $500, covering travel, setup, and the first portion of labor. On small jobs like a single-hole core drill or a short control joint cut, this is often the largest line item on the invoice.
Is Indoor Concrete Cutting More Expensive?
Yes. Tighter access, slurry management, and dust control add cost. Basement cuts and interior commercial work may require additional setup time and wet-cutting or vacuum equipment.
Get a Free Estimate for Concrete Cutting in Vancouver, WA
Accurate Concrete Cutting has served the Pacific Northwest for over 40 years and offers free estimates on all project types, from flat sawing and core drilling and sawing services to wall sawing and wire sawing. A site-specific quote will always be more accurate than a general price guide. Call (360) 694-8564 or contact the team online to request your free estimate today.
